4G DashCam DVR 2K Resolution LTE SIM Card Connectivity And GPS Security Camera
4G DashCam DVR 2K Resolution
,4G DashCam With Sim Card
,GPS Security Camera
Specification:
| system | operating system | linux |
| Number of online users | 4 users watching online simultaneously | |
| APP | Overseas: HotKam | |
| collection | processor | Hisilicon CV610 Cortex-A7 1T computing power |
| Memory | 1Gbit | |
| Image Sensor | 4MP 1/3 16:9 CMOS sensor | |
| Viewing Angle | Diagonal D 125° | |
| Collision Sensing | Gsensor three-axis accelerometer, collision gravity sensor | |
| video | Compression Standards | H.264 /MJPEF/JPEG |
| Proactive | Main stream: 2560X1440P/30fps Preview sub-stream: 1280X720P/25fps 2G4P D125° 17 heads | |
| Rear camera | Main stream: 1920X1080P/25fps Preview sub-stream: 1280X720P/25fps AHD/2.5mm AV headphone jack Pull the camera back, the extension cable is 5.5 meters long | |
| Audio | enter | Built-in -38dB microphone |
| Sampling frequency/bit width | 16KHz/16bit | |
| Compression standard/bit rate | G711A | |
| Alarm video | Collision Alarm | When the vehicle is hit/vibrated, an alarm event is pushed to the cloud, and the mobile phone APP receives the collision message |
| Human Detection | Human detection algorithm, parking sentry mode | |
| Network | 4G (Asia Pacific) Network European Version | FDD:B1/B3/B5/B8 |
| TDD:B34/B38/B39/B40/B41 | ||
| External SIM card slot Nano 12.3mm x 8.8mm x 0.7mm | ||
| Position | GPS | Beidou/GPS dual-mode one-click car search, electronic fence, track playback; domestic Amap; overseas Google Maps |
| Button | Reset button | Long press to restore factory settings |
| Power button | Long press to turn off / short press to lock the video of interest (10 seconds) | |
| Storage | Storage function | Support T-Flash card (up to 256GB) |
| Cloud Storage | 1 day of free recurring cloud storage | |
| Working Mode | Driving mode | Vehicle start detection driving mode, high frame rate 30FPS image quality, driving sensitivity setting |
| Parking monitoring | Vehicle parking monitoring, multiple monitoring modes to choose from: sleep collision recording, intelligent full-time recording, time-lapse recording | |
| Physical indicators | Alarm detection | Collision Alarm |
| power supply | DC12V±5%@Type-C interface | |
| Work Environment | Working temperature: -10~70℃, working humidity <90% |
1. Real-time location query: check real-time vehicle status and report a current location.
2. Regular monitoring: The terminal can upload the location information to the platform automatically after the vehicle is fired according to the time set by the administrator.
3. In/out of the designated area alarm: Platform setting is required to support rectangular, circular and polygonal area alarms.
4. Route deviation alarm: Support route deviation prompt and alarm, sectional speed limit prompt and alarm, in/out of the designated area or route prompt and upload information, etc.
5. Video signal loss alarm: Support camera signal identification then the terminal will automatically report fault alarm to the platform.
6. Low voltage alarm: When the main power supply voltage of the active safety intelligent terminal is 24V, when it is lower than 18V, A battery lower voltage alarm will occur at the terminal; the main power supply is 12V. When it is lower than 9V, the terminal will bottle lower voltage alarm.
7. Location antenna disconnection alarm: When the antenna is not connected or the link is damaged, the terminal will give a voice prompt.
The APP has a smooth experience, allowing you to quickly open live broadcasts and playback videos
- APP support Multi-screen monitoring, unlimited number of recorders, and APP fleet management
- 4G remote live broadcast, support remote viewing of on-site conditions anytime and anywhere, playback of TF card stored videos
- 2K HD resolution dual recorder
- Recording and video recording in one, with audio and video synchronization
- GPS/Beidou dual-mode positioning, electronic fence, driving track, one-key car search, positioning anti-theft
- One-click lock function for videos of interest (10 seconds), local TF viewing and playback
- Cloud service, push the detected video to the cloud for storage, no need to worry about device damage
Q1: Can the camera lens angle be adjusted?
The mounting bracket is adjusted, allowing you to adjust the device angle according to your vehicle model. You can fine-tune the angle while previewing the real-time image via the dedicated mobile app.
Q2: Why won’t the dashcam power on?
The dashcam requires a stable power supply to boot up. Please verify that the power connection is secure (please use the original car charger included in the package).
Check if the power cable connector is loose at the dashcam port.
If the issue persists, contact our after-sales support team for assistance.
Q3: What should I do if the device freezes and stops recording?
Disconnect the power supply, restart the device, and check if the function is restored.
Try replacing the SD card with a new one, or format the existing card (compatible with CLASS 10 U1 SD cards, 8GB–256GB capacity).
If the problem remains unresolved, contact customer service immediately.
Q4: Why can’t the mobile phone connect to the dashcam’s Wi-Fi?
A: 1. Check if the dashcam is powered on and its Wi-Fi function is enabled (the Wi-Fi indicator light is on).
2. Ensure the mobile phone is close to the dashcam to get the Wi-Fi
3. Verify that the mobile phone has connected to the correct Wi-Fi name of the dashcam.
4. If the connection fails repeatedly, restart both the dashcam and the mobile phone, then try again.
Q5: Built-in battery inquiry
This dashcam model does not have a built-in lithium battery. It cannot power on without being connected to a car charger. Please connect the device to the vehicle’s lighter port via the included car charger to activate it.

Please Use Our Online Inquiry Contact Form Below If You Have Any Questions, Our Team Will Get Back To You As Soon As Possible